MagyarEnglish
Főoldal
Termékek
Információ
Oldaltérkép
Hírek - újdonságok
Kapcsolat
Keresés
Referenciák
Linkek
Termékek kategóriák szerint
Termékek gyártók szerint:
 
...megszűnt
Ambient
Countryman
K&M
KRK Systems
Merging
Minnetonka
MOTU
Radikal Techn.
RTW
Rycote
Sanken
Schoeps
Sony
Sound Devices
Studer
TL Audio
Zaxcom





Elfelejtette jelszavát?
Főoldal arrow Webshop arrow Mikrofon előerősítő arrow MP-1 Microphone Preamp
Mikrofon előerősítő arrow MP-1 Microphone Preamp

MP-1 Microphone Preamp

MP-1 Microphone Preamp
Klikk - nagyobb kép


Description

Portable, battery-powered microphone preamplifier with phantom power
Designed for high-definition field production environments, the full-featured studio-quality MP-1 is an ideal line-driver for critical radio, television, and film applications. The MP-1 is extremely durable and easy to use. With rugged mechanical and electrical construction and high-quality components it will provide years of superb audio performance under the most punishing field conditions.

Key Features

  • Superb audio specifications
  • 66 dB of gain, in eleven discrete steps
  • Transformer-balanced input and output
  • Phantom power - 48 volt or 12 volt
  • High pass filter @  80 Hz or 160 Hz, 6 dB/octave
  • Limiter makes unit virtually "unclippable"
  • High current line output drive
  • Excellent immunity to RF interference.
  • Battery power (two x AA)
  • Durable mechanical construction
  • Specifications

    Gain:
    0 dB to 66 dB input to output, switch selectable
    Gain Accuracy:
    +0.6, -0.1 dB with reference to front panel gain markings (150 ohm source, 100k ohm load impedances)
    Frequency Response:
    20 Hz - 22 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz (relative to 1 kHz level with 150 ohm source)
    Equivalent Input Noise:
    -126 dBu (-128 dBV) maximum (150 ohm source, flat weighting, 22 - 22 kHz bandwidth, gain setting 36 dB or greater)
    Output Clipping Level:
    +22 dBu minimum with 100k ohm load; +20 dBu minimum with 600 ohm load
    Input Clipping Level:
    +4 dBu minimum at the 0 or +18 dB gain setting
    Dynamic Range:
    122 dB minimum at the +18 dB gain setting
    THD + Noise:
    0.05% Maximum (from 60 Hz to 22 kHz @ +4 dBu output level, 22 Hz - 22 kHz filter bandwidth, +46 dB gain setting)
    Common Mode Rejection Ratio:
    100 dB minimum at 80 Hz; 60 dB minimum at 10 kHz
    Input:
    Transformer-balanced, 2000 ohm input impedance
    Output:
    Transformer-balanced, 130 ohm output impedance
    Phantom Power:
    12V or 48V (switch selectable) per DIN 45 596 specification
    Limiter:
    Limits to +17 dBu output level; 10:1 limiting ratio; 5 mS attack time, 100 mS release time; Amber/Red LED indicates limiting/clipping
    High-Pass Filter:
    80 Hz or 160 Hz (switch selectable), 6 dB per octave Internal Voltage Rails:
    +15 V and -15 V, regulated
    Operating Temperature Range:
    0 to 70 degrees C (32 to 160 degrees F)
    Power:
    2 AA batteries, 24 hours life typical with +4 dBu signal into 600 ohms, no phantom power
    Power LED:
    Green indicates power and good battery. Red indicates power and low battery. LED turns red when approximately 4 hours of battery life remain.
    Polarity:
    Mic input to line output is non-inverting
    Dimensions:
    43 mm x 94 mm x 140 mm (h x w x d) (1.7" x 3.7" x 5.5")
    Weight (unit only):
    0.56 kg (1.24 lbs.)
    Weight (packaged):
    0.86 kg (1.90 lbs.)
    Certification:
    Meets FCC Part 15 Class B, Eligible to bear CE mark

    Downloads


    acro-sm.gif User Guide (116 kB)
    acro-sm.gif Fact Sheet (315 KB)

    Ár: 134 283 Ft (27 % áfával)

    Hozzáférhetőség

    Szállítási határidő:

    onstock.gif